OS Performance Jacket Boosted Edition

Cruise back to the marina after sunset. Stand watch through the night. Leave before first light. When the temperature drops, the OS Performance Jacket Boosted Edition gives you extra warmth – at the touch of a button – helping you stay comfortable for longer without compromising freedom of movement.

Lightweight insulation works alongside integrated graphene heating technology, powered by a rechargeable battery pack, to deliver adjustable warmth exactly where you need it.

With three heat settings, four-way stretch and a PFAS-free water-repellent finish, it's built for changing conditions, early starts and late finishes – so you can focus on the way ahead, not the cold.

Operating Instructions:
1) Charge the power pack fully before first use using the USB-C port.
2) Place the power pack inside the dedicated internal pocket and connect it using the USB-B cable found in the same pocket.
3) Press the button on the left side of the power pack to turn it on. The power pack will enter standby mode after 60 seconds of inactivity. To keep it active (e.g., during a demonstration), press and hold the same button for 6 seconds.
4) AUTO MODE: Press and hold the “Boosted” button on the chest for 3 seconds to activate heating. This mode delivers 10 minutes of high heat, 20 minutes of medium heat, then automatically switches to low heat.
5) MANUAL MODE: Press the Boosted button again to cycle through heat levels:🔴 Red – High (63 °C ± 5 °C)🔵 Blue – Medium (58 °C ± 5 °C)🟢 Green – Low (50 °C ± 5 °C)6)To turn off, press and hold the Boosted button for 3 seconds.
1) Charge the power pack fully before first use using the USB-C port.
2) Place the power pack inside the dedicated internal pocket and connect it using the USB-B cable found in the same pocket.
3) Press the button on the left side of the power pack to turn it on. The power pack will enter standby mode after 60 seconds of inactivity. To keep it active (e.g., during a demonstration), press and hold the same button for 6 seconds.
4) AUTO MODE: Press and hold the “Boosted” button on the chest for 3 seconds to activate heating. This mode delivers 10 minutes of high heat, 20 minutes of medium heat, then automatically switches to low heat.
5) MANUAL MODE: Press the Boosted button again to cycle through heat levels:🔴 Red – High (63 °C ± 5 °C)🔵 Blue – Medium (58 °C ± 5 °C)🟢 Green – Low (50 °C ± 5 °C)6)To turn off, press and hold the Boosted button for 3 seconds.

The Gill Blog

Learn the tech, understand the design, and discover how Gill keeps you performing at your best — in every condition, on every adventure.